Equipments

INVERTED MICROSCOPE

Inverted microscopes are useful for observing living cells or organisms under more natural conditions than on a glass slide, as is the case with a conventional microscope.Inverted microscopes are used in micromanipulation applications where space above the specimen is required for manipulator mechanisms and the microtools they hold, and in metallurgical applications where polished samples can be placed on top of the stage and viewed from underneath using reflecting objectives. (view manual)

STEREO MICROSCOPE

The stereo or stereoscopic or dissecting microscope is an  optical microscope variant designed for low magnification observation of a sample, typically using light reflected from the surface of an object rather than transmitted through it. The instrument uses two separate optical paths with two objectives and eyepieces to provide slightly different viewing angles to the left and right eyes. This arrangement produces a  three dimensional visualization of the sample being examined. (view manual)

FUME HOOD

A fume hood or fume cupboard is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts. A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.

SPIN COATING

Spin coater is a machine to be used to deposit uniform thin films to flat substrates in coating procedure. Usually a small amount of coating material is applied on the center of the substrate, which is either spinning at low speed or not spinning at all. The substrate is then rotated at high speed in order to spread the coating material by centrifugal force. (view manual)

DRY CABINET

It is a storage container in which the interior is kept at a low level of humidity. It may be as simple as an airtight and watertight enclosure, or it may use active means to remove water vapor from the air trapped inside.

They are also used in the storage of surface mount   electronic components prior to of  circuit board assembly, to prevent water absorption that could flash into steam during soldering, destroying the part.

MAGNETIC STIRRER WITH HEATING

A magnetic stirrer or magnetic mixer is a laboratory device that employs a rotating magnetic field to cause a 

stir bar (also called "flea") immersed in a liquid to spin very quickly, thus stirring it. The rotating field may be created either by a rotating magnet or a set of stationary electromagnets, placed beneath the vessel with the liquid.

DIGITAL MULTIMETER

It is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance. They can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as

an electronic measurement.

DUAL SYRINGE PICOLITER PUMP

Dual syringe infuse/withdraw optimized for low flow with program options for 2 programs. Accomodates syringes 0.5 μL to 10 mL/ User definable flow rates with selectable target volume or time values to control the total infusion volume. (view manual)

TUBE FURNACE

A tube furnace is an electric heating device used to conduct syntheses and purification of inorganic compounds and occasionally in organic synthesis. (view manual)

ATX ANALYTICAL BALANCE

It is a class of balance designed to measure small mass in the sub-milligram range. The measuring pan of an analytical balance (0.1 mg or better) is inside a transparent enclosure with doors so that dust does not collect and so any air currents in the room do not affect the balance's operation. 

INCUBATOR

An apparatus in which environmental conditions, such as temperature and humidity can be controlled often used for growing bacterial cultures, hatching eggs artificially or providing suitable conditions for a chemical or biological reaction.

FRIDGE FREEZER

A laboratory refrigerator is a common laboratory appliance that consist of a thermal insulated compartment and a heat pump which transfers heat from the inside of the unit to its external environment so that the inside is cooled to a temperature below the ambient temperature of the room, freezing point of water or much beliw depending on the substance being frozen. (view manual)

WATER PURIFICATION SYSTEM / DIONIZE WATER

 Water that has been purified to uncommonly stringent specifications. Its  to emphasize the fact that the water is treated to the highest levels of purity for all contaminant types, including: organic and inorganic compounds; dissolved and particulate matter; volatile and non-volatile, reactive and inert; hydrophilic and hydrophobic; and dissolved gases. (view manual)

OXYGEN PLASMA

This machine involves the removal of impurities and contaminants from surfaces through the use of an energetic plasma created from gaseous species.The plasma is created by using high frequency voltages to ionise the low pressure gas although atmospheric pressure plasmas are now also common. (view manual)

ULTRA SONIC CLEANER

An ultrasonic cleaner is a machine that process by using ultrasound and an appropriate cleaning solvent to clean items. The ultrasound can be used with just water, but use of a solvent appropriate for the item to be cleaned along with the soiling enhances the effect. 

METALLURGICAL MICROSCOPE

A microscope used in the study of metals, usually optical. It is a type of microscope which uses visible light and a system of lenses to magnify images of small samples.

BIOLOGICAL SAFETY CABINET

It is an enclosed, ventilated laboratory workspace for safely working with materials contaminated with (or potentially contaminated with) pathogens requiring a defined biosafety level. (view manual)